Spray tip
The new Turbo TeeJet Induction spray tip is designed to apply chemicals accurately in areas where off-target drift is a concern and good overlap distribution is required.
A pre-orifice design eliminates smaller droplets and produces large, air-filled, drift-resistant droplets. Based on the design of the original Turbo TeeJet spray nozzle, the TTI offers a wide-angle, flat spray pattern, excellent spray pattern distribution and a polymer construction.
Other TTI features include easy pre-orifice removal for cleaning and inspection, a choice of six capacities ranging from 0.15 to 0.5 gallons per minute at 40 psi, colour coding in compliance with the ISO standard for easy capacity identification and easy installation and alignment.
Read Also
VIDEO: Green Lightning and Nytro Ag win sustainability innovation award
Nytro Ag Corp and Green Lightning recieved an innovation award at Ag in Motion 2025 for the Green Lightning Nitrogen Machine, which converts atmospheric nitrogen into a plant-usable form.
The nozzles are good for spraying near residential areas, open water or susceptible plants.
For more information, write to Contact Spraying Systems Mobile Systems Division, Box 7900, Wheaton, Illinois, U.S.A. 60189-7900, visit www.teejet.com or visit a TeeJet retailer.
Digital IPM camera
Spectrum Technologies Inc. has developed a digital IPM camera to assist in identifying and tracking pest and disease pressures in the field.
The IPM Scope camera captures and magnifies images or video by as much as 140 times the original size. An LED light illuminates the samples. Users can edit and enhance the photos by using labels and measurements.
The digital images can be uploaded to a personal computer using a USB connection and can then be e-mailed to industry experts for identification.
For more information, write to Spectrum Technologies Inc., 12360 S Industrial Drive East, Plainfield, Illinois, U.S.A., 60544, phone 800-248-8873 or visit www.specmeters.com.
Oil removal pumps
Pela Products has developed a series of hand-drawn pumps designed to remove oil from small engines without removing the drain plug.
Pela oil extractors come in four sizes ranging from 2.5 litres holding capacity to 14 litres.
To use the extractors, operators must warm the engine and then insert the extractor’s pliable plastic tube into the engine’s dipstick pipe or oil filler neck. The pumping unit creates a strong vacuum that sucks oil into a calibrated container.
The extractors are designed to remove oil from auger motors, lawn mowers and other small engines.
For more information, contact Pela Products. 55 Bellechase E., Montreal, H2S 1W2, call 888-272-7964 or visit www.pelaproducts.com.
